Seagate has introduced the Exos M series, a range of enterprise-grade mechanical hard drives available in 30TB and 32TB capacities. The two models, the 30TB CMR ST30000NM004K and the 32TB SMR ST32000NM003K, each offer a minimum of 3TB per disk and use a standard 3.
These things are unreliable, I had 3 seagate HDDs in a row fail on me. Never had an issue with SSDs and never looked back.
well until you need capacity why not use an SSD. It’s basically mandatory for the operating system drive too
Capacity for what?. There are 4tb SSD m.2 costing $200 bucks cmon…
I would rather not buy so large SSDs. for most stuff the performance advantage is useless while the price is much larger, and my impression is still that such large SSDs have a shorter lifespan (regarding how many writes will it take to break down). recovering data fron a failing HDD is also easier: SSDs just turn read-only or completely fail at one point, in the latter case often even data recovery companies being unable to recover anything, while HDDs will often give signs that a good monitoring software can detect weeks or months before, so that you know to be more cautious with it
How is it easier? Do you open your HDDs and take info from there? Do you have specialized equipment and knowledge? Second, if you detect on smart that you are closer to TBW, change the SSD duh… Smart is a lot more effective on SSDs depending the model it even gives you time to live…
obviously not. often they don’t break all at once, but start with corrupting smaller areas of sectors
Seagate in general are unreliable in my own anecdotal experience. Every Seagate I’ve owned has died in less than five years. I couldn’t give you an estimate on the average failure age of my WD drives because it never happened before they were retired due to obsolescence. It was over a decade regularly though.
HDD is unreliable with all those moving parts and arms and cilinders.