Hello,
Finally built a new rig, and wanted to ditch Windows.
Got KDE neon up and running, booted into it, got my browser mostly back to how I like it, ran an update for my video card. I didn’t notice the screen blackout and come back like it normally would for a video update, but I don’t think that has anything to do with my current issue. I tried to restart to make sure it was running, and the update part of discover showed up and said I had a couple hundred updates to get, no big surprise there, since it is a fresh install.
Then it hung on fetching updates, and while I could browse my list of programs, I couldn’t do anything else. So I did a hard shut down and powered back up.
It sticks on some kennel warnings and won’t go any further.
Obviously I can’t really do anything from there that I know of.
I also can’t even get it to boot with the install media. That just sticks on a black screen. I can tell the monitor is actually showing black, as it doesn’t give the “NO SIGNAL” warning. I have no idea what to do from here since I can’t get it to react to anything, much less know how to fix anything if I could get in.
As for what the warnings say, there are 6 or so lines saying the same thing: problem blacklisting hash (-13), and one more that says nvme2: failed to set APST feature (2)
I haven’t put anything on nvme2 yet, I haven’t even formatted it yet, just the primary drive (nvme0). So I’m not sure what could possibly be wrong with it yet.
You must log in or register to comment.
Can you say the hardware
MSI MAG Z790 Tomahawk
i7 13700k
Kingston 2x32GB Ripjaws Either Z5 or S5, I can’t remember off the top of my head.
RAM is misbehaving too. I got 64GB for this, but only one slot seems to want to work so far, so at the moment just 32. I don’t think this is related to this issue though.
2 different 2TB M.2 nvme, and another older 512GB. All 3 unused until now.
RTX 3070ti, got used, but still works fine. At least from what I’ve gotten to try it out so far, I can’t boot to start downloading games yet to really try it out.
If your memory is not stable you’re always going to have weird problems. I would get to the bottom of that first before anything else.
Well I have no idea what to check or how in that regard.
New build, new hardware, and got me, totally new OS.
Not too different than on Windows. Stress tests, MemTest86, disable/enable XMP, double check voltage, update your BIOS. Check that your RAM is on the motherboard’s qualified vendor list. It might be worth making a separate post about it.
I meant I don’t know how to do that given that it won’t boot with both sticks in. Another weird thing is the shot the motherboard says to use first is not working, but the door it says to use 2nd is.
QVL lists this exact memory, but only the smaller version (2x16 instead of 2x32). Not sure if that would cause an issue, especially since one stick works at a time. So clearly the sticks themselves aren’t bad, they both work one at a time. Max compatible capacity is 192, so I would think you’d be able to get there somehow. I can double check voltage, but I haven’t touched it, and I would assume the default is safe. But maybe that’s on me for assuming.
I can try toggling xmp, but that doesn’t seem likely. I’ll give it a shot in a couple hours.
As for bios update, I haven’t checked into it yet, but they gave a usb with some updater that’s meant to be run under Windows, I don’t know how I would use that or what I would do instead. I figured I could get it running before I got that done but maybe it needs to be done sooner than I thought.
Either way I’ll try to figure out both of those ideas before making another thread for that.
I think it’s worth looking into before pointing a finger at any particular OS. If your troubleshooting requires you to install Windows, go for it. My gut feeling is that the memory requires more voltage but that’s not based on anything but my own experience. Go through all the troubleshooting steps.
Why did you choose kde neon wouldn’t fedora be better for you …
Filling up the Linux bingo card quick this morning…
Noobs: “Help! How can I do X?”
Community: “Pfft! Why do you want to X? You should be using Y instead.”Before even commenting this do you even know what KDE neon is ? It’s a distro , I would recommend to intermediates than newbies because of the troubleshooting you need to do everytime when updating.Arch was more easy than using this.
Check out the one-man band. “Don’t you know that I’m smarter than you?” and “I use Arch, btw” in one comment!
I am using arch as reference for a difficulty scale since most of us have already tried installing arch.The point is it’s difficult in using KDE neon without proper knowledge.
Anything and everything is difficult without proper knowledge. These comments add nothing to the conversation, but they do promote negative stereotypes within the community. Be better.
Well the hardware he has better support on the recent releases.KDE neon wouldn’t be a good choice for it and kde neon is a rolling release of KDE so there are more bugs than normal ubuntu
Not sure how I was supposed to know that without being familiar with either of them yet. 🙃
deleted by creator
Then how did you even choose you distro man
I always figured I’d have to try several to figure out what I wanted without knowing the difference between any of them.
Ubuntu was too obvious a choice, so I skipped it like I used to skip top 40 radio stations.
So I just kinda looked around at some less popular ones that still had guts of a popular choice. KDE sounds better than GNOME to me, and a friend of mine who took the plunge already is using Kubuntu and like it. So I landed here for my first rodeo. I’ve I dive in I figured I’d start absorbing more knowledge, since it’s far easier to want to learn more once you have at least one familiar starting point and know some lingo, and once you’re actively using it and have more of a personal stake in it. I got the installer prepped a couple weeks ago and only found out a few days ago that rolling release distros were a thing. I knew Ubuntu had a regular and LTS version from when I messed with a live CD version about 20 years ago, but didn’t see that option with this one, so at the time I thought it only had a regular version.
Picked up the used GPU from him a few days ago and he mentioned rolling release then, which is how I learned they existed. Didn’t realize this was one until you said that.
Given that new info, I’m more than open to trying fedora because of that.
But I hope that answers your question.
Go to uefi. Change boot order to install media. Boot from it. And do a complete fresh install.
This is annoying, but better now than after I get settled in.
Do you know anything I might’ve done to cause this? I don’t wanna do whatever it was again.
when you reinstall, try to use btrfs (idk if kde neon support it in the installer)
then use timeshift to do a snapshot every day and a snapshot before upgrade. but set it up so that there are not more than ~10 snapshots.
next time something goes wrong you can restore the last snapshot.
Some distros also set it so you have previous snapshots as boot entries in grub.
It was an option, but I was planning on trying a couple different distros, and I know ext4 has better compatibility, and didn’t want to format the whole drive back and forth, or have multiple systems at once time on different partitions. Once I settle permanently if it is an option I’ve heard some say it’s better, but haven’t looked into it yet.
Edit: just realized this sounds a little consider to the other comment.
What I mean to say is at least it was before I installed any programs and got to try it out. Based on another comment, I now know this is a rolling release which is not something I’m interested in anyway.
deleted by creator
I actually haven’t gotten it to reboot into USB yet, am working on getting back to the machine here in a few minutes.
I saw an article where the open driver for version 530 was marked as “recommended”, but borked systems. On 535 the closed one was recommended, so I went with that.
Hadn’t gotten around to any software yet.
I’m not familiar with the phrase bathtub fault. What’s that slang about? I’m really hoping I don’t have to RMA the board, taking it apart again would be a huge pain in the ass.
deleted by creator
