• HatchetHaro@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    44
    arrow-down
    5
    ·
    edit-2
    1 year ago

    On LCD displays dark mode actually uses more electricity; the brightness is always there, and you need to power the liquid-crystal layer to block that light to result in darker colours.

    This whole myth about darker screens saving energy goes way back to the old CRT days when it actually did save some energy.

    Yall remember Blackle?

    • I use NixOS btw @lemmy.world
      link
      fedilink
      English
      arrow-up
      54
      arrow-down
      1
      ·
      1 year ago

      Many phones have OLED displays, which physically turn off the pixels in black areas. Since the site is on mobile, it does make a bit of sense.

      • Holzkohlen@feddit.de
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        But then most dark modes aren’t pitch black. I guess it might save a bit of power by just being at a low brightness. Anyways I need my dark mode and also night mode.

        • SkyeStarfall@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          9
          ·
          1 year ago

          Less brightness means less light emitted by the diodes means less power is used. They may not turn off, but they still use less.

          • HatchetHaro@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Fun fact! Many OLED displays dim the whole image not by making the diodes dimmer, but by pulsing the diodes fast enough to match the desired brightness of each pixel.

            You can test this by taking your OLED phone, pulling up an image, and then waving it around at different brightness levels; the observed image would become blurry at high brightness levels, but would separate into distinct “frames” at lower brightness.

            I’m not sure if every OLED does this; just from the phones that I have used.

    • Zephyr_0713@lemmy.world
      link
      fedilink
      English
      arrow-up
      17
      arrow-down
      1
      ·
      1 year ago

      In case you are using an OLED screen or one of its variants, the difference is noticeable since they turn off the pixels that are black and, therefore, less electricity is consumed.

        • VediusPollio@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Yes for OLED. Sometimes for LCD.

          From what I understand, LCDs can have a resting state that will either stop light, or a resting state that will let light through. The backlight remains on, but a panel that natively blocks the light will require less power when showing black.