While they were happy with what the fairphone 4 brought to the table, they seem to like what was changed for the fairphone 5.
What are you guys’ opinions on this? A welcome change? would you get one if your phone died within the next year?

    • foggenbooty@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      2
      ·
      1 year ago

      Wow, so gaming with reliable latency is a special usecase? Wi-Fi is awesome for convenience but it can never be better than wired because of physics.

      • BigDanishGuy@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        13
        ·
        1 year ago

        so gaming with reliable latency is a special usecase

        Yes, yes it is. Most people couldn’t care less, they just want convenience.

        What are the physics you’re talking about?

        • foggenbooty@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Wi-Fi is a shared medium where airtime is split amongst multiple clients on a radio spectrum that is open for all the public to use… Wired gives each device dedicated bandwidth with no interference. Wireless gets better and better, but it can never, and will never, be faster than a dedicated cable.

          • BigDanishGuy@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 year ago

            None of that are physical limitations, it’s purely implementational. Legacy ethernet was half-duplex as well, before switching and dedicated pairs for tx/rx became the norm. Handling of the shared medium is done with CSMA-CA and not -CD, which was used for ethernet, so at least we learned something.

            Copper is also susceptible to interference, both RFI and EMI. Sure you can mitigate the effect by shielding and twisting the wire pairs with different amounts of twists pr length. But in the end, copper is also susceptible to interference.

            I’m not an RF engineer, and I don’t have an idea of what can be done to mitigate noise in wifi even further. But claiming that it’s an inherent physical limitation, that can’t be mitigated, that’s just defeatism. It’s about the implementation, not physical constraints.