• MystikIncarnate@lemmy.ca
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 months ago

    I would assume newer appliances have just as many increases to efficiency, as they do corners cut to reduce the cost.

    I’d say the smart features are something new, but it’s almost always locked behind information stealing applications that you need to have, just to check if your laundry is done yet.

    9 times out of 10 you can get better smart integration with some alligator clips and a raspberry Pi or esp32.

    • mechoman444@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      In 20 years of appliance repair doing on average 5 orders a day I have met maybe two or three clients that used the smart features in their appliances. Otherwise they are totally useless.

      I remember reading an article from GE a while ago where they were complaining that very, very few people were using the WiFi features on their washers and dryers.

      No one asked for WiFi, no one needs Wi-Fi on their appliances.

      • MystikIncarnate@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        I only want to get an alert when the dryer finishes. The places I usually sit and wait for it to do the thing, are all too far away to hear the frilly “end chime” it quietly plays at the end of the cycle.

        My late father’s dryer had a very loud buzzer that you could hear almost everywhere in the house.

        The dryer in my home just plays a little ditty through what I can only describe as a 486 system speaker. I can’t hear it one room over.