I’m trying to do that; but all of the newer drives i have are being used in machines, while the ones that arent connected to anything are old 80gb ide drives, so they aren’t really practical to backup 1tb of data on.
It’s possible to make that work; through discipline and mechanism.
You’d need like 12 of them but if you’d carve your data into <80GB chunks, you could store every chunk onto a separate scrap drive and thereby back up 1TB of data.
Individual files >80GB are a bit more tricky but can also be handled by splitting them into parts.
What such a system requires is rigorous documentation where stuff is; an index. I use git-annex for this purpose which comes with many mechanisms to aid this sort of setup but it’s quite a beast in terms of complexity. You could do every important thing it does manually without unreasonable effort through discipline.
For the most part i prevented myself from doing the same mistake again by adding a 1gb swap partition at the beginning of the disk, so it doesn’t immediatly kill the partition if i mess up again.
Another good practice is to attempt any changes on a test model. You’d create a sparse test image (truncate -s 1TB disk.img), mount via loopback and apply the same partition and filesystem layout that your actual disk has. Then you first attempt any changes you plan to do on that loopback device and then verify its filesystems still work.
That would require all of those disks to be connected at once which is a logistical nightmare. It would be hard with modern drives already but also consider that we’re talking IDE drives here; it’s hard enough to connect one of them to a modern system, let alone 12 simultaneously.
With an Index, you also gain the ability to lose and restore partial data. With a RAID array it’s all or nothing; requiring wasting a bunch of space for being able to restore everything at once. Using an index, you can simply check which data was lost and prepare another copy of that data on a spare drive.
I’m just talking prebuilt solutions here, but how would you use an index’d storage base if the drives weren’t connected? Sounds like that’s an issue regardless
Note that all of this is in the context of backups; duplicates for the purpose of restoring the originals in case something happens to them. Though it is at least possible to use an index cold storage system like what I describe for more frequent access, I would find that very inconvenient for “hot” data.
how would you use an index’d storage base if the drives weren’t connected
You take a look at your index where the data you need is located, connect to that singular location (i.e. plug in a drive) and then copy it into the place it went missing from.
The difference is that, with an Index, you gain granularity. If you only need file A, you don’t need to connect all 12 backup drives, just the one that has file A on it.
The problem is that i didn’t mean to write to the hdd, but to a usb stick; i typed the wrong letter out of habit from the old pc.
As for the hard drives, I’m already trying to do that, for bigger files i just break them up with split. I’m just waiting until i have enough disks to do that.
The problem is that i didn’t mean to write to the hdd, but to a usb stick; i typed the wrong letter out of habit from the old pc.
For that issue, I recommend never using unstable device names and always using /dev/disk/by-id/.
As for the hard drives, I’m already trying to do that, for bigger files i just break them up with split. I’m just waiting until i have enough disks to do that.
I’d highly recommend to start backing up the most important data ASAP rather than waiting to be able to back up all data.
It’s possible to make that work; through discipline and mechanism.
You’d need like 12 of them but if you’d carve your data into <80GB chunks, you could store every chunk onto a separate scrap drive and thereby back up 1TB of data.
Individual files >80GB are a bit more tricky but can also be handled by splitting them into parts.
What such a system requires is rigorous documentation where stuff is; an index. I use git-annex for this purpose which comes with many mechanisms to aid this sort of setup but it’s quite a beast in terms of complexity. You could do every important thing it does manually without unreasonable effort through discipline.
Another good practice is to attempt any changes on a test model. You’d create a sparse test image (
truncate -s 1TB disk.img), mount via loopback and apply the same partition and filesystem layout that your actual disk has. Then you first attempt any changes you plan to do on that loopback device and then verify its filesystems still work.Or mount it in RAID0/whatever the zfs equivalent is.
The downside over one disk is many have more possible points of failed, taking out the whole array - so ideally another RAID would be best
That would require all of those disks to be connected at once which is a logistical nightmare. It would be hard with modern drives already but also consider that we’re talking IDE drives here; it’s hard enough to connect one of them to a modern system, let alone 12 simultaneously.
With an Index, you also gain the ability to lose and restore partial data. With a RAID array it’s all or nothing; requiring wasting a bunch of space for being able to restore everything at once. Using an index, you can simply check which data was lost and prepare another copy of that data on a spare drive.
I’m just talking prebuilt solutions here, but how would you use an index’d storage base if the drives weren’t connected? Sounds like that’s an issue regardless
Note that all of this is in the context of backups; duplicates for the purpose of restoring the originals in case something happens to them. Though it is at least possible to use an index cold storage system like what I describe for more frequent access, I would find that very inconvenient for “hot” data.
You take a look at your index where the data you need is located, connect to that singular location (i.e. plug in a drive) and then copy it into the place it went missing from.
The difference is that, with an Index, you gain granularity. If you only need file A, you don’t need to connect all 12 backup drives, just the one that has file A on it.
The problem is that i didn’t mean to write to the hdd, but to a usb stick; i typed the wrong letter out of habit from the old pc.
As for the hard drives, I’m already trying to do that, for bigger files i just break them up with split. I’m just waiting until i have enough disks to do that.
For that issue, I recommend never using unstable device names and always using
/dev/disk/by-id/.I’d highly recommend to start backing up the most important data ASAP rather than waiting to be able to back up all data.