Ham radio! It’s relaxing. My favorite activity is to take my portable gear to parks and operate Parks on the Air.
My brother used to be really big into his ham radio. It got smashed in his move and he never bought another one =\
I am waiting for my exam. After that I will have my own call sign. Ham radio is cool
How do you decide on a call sign?
It is assigned to me I cannot choose call sign unfortunately
What do you think about the baofeng radios with ham? Pretty good to start out with?
They are fine for starting out with, but you’ll probably want to upgrade soon. There are better radios for around $75 if you can afford it.
What would you recommend? Is there a good mega thread here?
Most activity, I’ve seen here: !amateurradio@lemmy.ko4abp.com but there’s a lemmy bug that’s not showing a bunch of posts. That should be resolved soon.
These are good cheaper radios (The price has gone up a bit)
There’s also !amateur_radio@lemmy.radio which is reasonably active.
Ima be honest with ya, I believe those cheaper yaesus are actually practically baofengs component wise. But, they are still a bit better due to some higher quality components and wayyyy better QC. Just wanted to throw this out there.
They’re pretty much baofengs with much better filtering, so you don’t get front end overloading which can be frustrating.
yup
I had no idea about Parks on the Air. Thanks! I’ll be checking out.
Just getting into Ham radio and SDR myself as of late, so cool and so fun to tweak around with. Got any recommendations for guides or articles to read and learn from? I’m brand new just got a SDR-RTL dongle 📡
You should check out Ham Radio Crash Cpurse on YouTube. Lots of great info there.
Hell yeah, came here to say this. 73 friend.
Just getting into this myself! Got any recommendations for guids/videos/articles? I’d be happy to check anything out 👍
I’ve been getting into primitive technology lately. It all started when I looked at my back yard and thought hey, if we call it red clay, then I should be able to make it into pottery. I take dirt from my yard, levigate it, add grog and wedge, hand-build pots, and fire them in my fire pit. Been making sharpening stones from river rocks. Crafting replicas of Roman machines. That sort of thing.
This could be niche, but I’m a fountain pen nerd. I love stationary, different types of papers inks and nibs and how they all influence the writing experience.
Fountain pens are also for some people more disability friendly. Handwriting has sucked for me as long as I remember as it causes a lot of pain and cramping. Fountain pens glide easier and I can write longer with one than with any other type of pen.
Handwriting has sucked for me as long as I remember
So fountain pens are not the default tool for getting into handwriting everywhere? What did you use to learn to write with as a child?
I’m Finnish. We also start with wooden pencils and graduate to either ballpoint pens or some kind of fineliner marker. I am the only person I know with a fountain pen who actually uses it for normal writing. Mainly because it hurts so much less.
In the US most kids learn with pencils. When I was a kid we used wooden pencils until mechanical ones were eventually allowed and ballpoint pen usage typically was discouraged until high school. I settled on smooth flow liquid ink ball point type pens for extensive handwriting nowadays.
I’m starting to think fountain pens aren’t all that niche, especially given the lovely community at !fountainpens@wayfarershaven.eu
Oh nice, didn’t know that was a community. I’ll head on over.
It’s such a nice community!
i’ll have to check it out — back about five years ago r/fountain pens was a great community!
+1 for fountain pens!
Ooooh I’ve inherited a Pelikan Meisterstück from my father and it is glorious.
I’m totally on board with inks and different paper textures… It is cool to see and experience all the little details.
oh, absolutely!
i spent way too much buying my grail pen a couple years back (pilot namiki falcon with 14k soft flex nib) and it is an absolute dream… though i do still love my pilot metropolitan and cheap jinhaos!
Oh don’t feel bad, my personal favorite and most expensive is my Pilot Custom 823. It holds a ton of ink and the nib is amazing
ooh very nice… i better not look into it or i will be buying more pens… haha.
my biggest issue is finding paper that is not super expensive and can hold the ink well… bristol board is my favorite but loose sheets are annoying. i’ve found platinum’s carbon black to be the absolute best ink, after trying out many goulet and noodler’s blacks…
Used to be sword fighting, but difficult after I got into an accident and can barely use my hand anymore…
I used to do historical reenactment so would regularly fight with swords, spears, axes, knives etc. Great fun but the injuries start to really hurt over time. A broken knuckle and getting stabbed in the face with a semi-sharp sword that resulted in a hospital visit were my worst!
“I used to be an adventurer like you. But then I took an arrow into the knee…”
“But then I took a sword to the face…” idk which one is worse!
A broken knuckle and getting stabbed in the face with a semi-sharp sword that resulted in a hospital visit were my worst!
I’m sorry this happened to you. It does sound like you and your group went way too far for the equipment you were using.
Usually theres a tradeoff between historical accuracy, safety equipment and sparring intensity.
If you have no adequate hand protection for historical reasins, you either need lower intensity or explicitly forbid hand hits.
If you want to fight at full intensity of you need to fall back on less accurate protection and maybe even still adjust rulesets.
If you want accurate swords with no rolled / flared point, you must change how thrusting works.
I got a fencing mask imprinted on my forehead once because we also went too intense with polearms for the gear we had.
The broken knuckle was an unfortunate accident during a public show. The angle of the sword thrust happened to go up into my glove and popped a knuckle. The sword to the face was during training by someone who should have known better than to sneak a semi-sharp in. Still, scars to your face add character!
Damn :c… Such a shame :/
Sounds like this is not dangerous at all.
I hope you get well soon my friend
My condolences. I also lost a bunch of hobbies due to hand injuries. It’s depressing
What kind? Doing HEMA myself, though not as much as I’d like
Left is a ghost pepper, right is a 7 Pot Congo
Ever try growing Pepper X?
Nah, never seen the seeds for them from a reputable seller sadly! I’ve got reapers and a couple of naga varieties in the garden though
Nice. Do you use grow lamps?
I thought about getting one but opted not to. I’ve got south facing windows so all my plants through spring are able to get all the sun they need!
So the chillies part is obvious enough, but why in beer cans?
Do they bear fruit in such small containers?
Do you have any problems with gnats?
This is awesome and I need to find a way to do it.
I’ve been on a hiatus due to some medical stuff making it hard for me to concentrate, but I’m a lock nerd. I collect cool locks (“cool” being very subjective here 😅) and pick / manipulate them.
edit: here’s a tiny part of my collection. I’d upload more but I’m having a hard time with the mobile site and image uploads
what’s up fellow locksport nerd?! I think people would be shocked how easy rudimentary picking is.
A-ha, I knew there have to be lock nerds on Lemmy.
But yeah the basics are dead simple, you just need to have a light touch and listen to your fingers 😄
And so much of the stuff applies for the majority of lock mechanisms. A lot of it boils down to “apply tension, feel for pins / disks / sliders / wafers / whatever that don’t want to move and then you make them move, while leaving the other pins / etc. alone. Repeat until done”
These look so cool!
Right?!
The coolest one I have is probably this weird prototype lock called the RKS or “RoboKey System”, which is sort of like a cross between a regular door lock (it’s in an Abloy body) and a safe combination lock. The idea behind it was that you’d have a small portable device (only slightly larger than a key fob) that would be used to dial open the lock, and that device would be remotely programmable, meaning access could be granted and revoked remotely (you’re just sending ). The prototype locks are cutaways so you can see what’s going on inside, but the “real” ones would have been completely sealed. Basically they’d have lots of the pros of electronic locks but without having to have powered and/or complicated locks that are sensitive to environmental conditions, so they would have been great in challenging environments where you’d want the upsides of electronic locks but can’t use the current ones (I think marine shipping was one thing they envisioned could benefit from them.) Unfortunately it didn’t take off, so some hundreds of prototypes are all that exist. They still make them on occasion, purely for us lock nerds 😄
I build custom mechanical keyboards. Got into it because of the Pandemic and now I have built 6 of them. /r/mk and /r/emk used to be some of my most visited subs on the other site. I’m now known as the goto for keyboard questions in my circles of friends.
I started getting into fidgeting more lately and took a liking to magnetic sliders and now have a few that I pretty much always have with me.
And that extended into me learning about begleri beads somehow so now I am attempting to learn that. I can do slips and 2 finger wraps and occasiaonal one finger or thumb wraps but not much else yet. I accidentally learned a stall because I messed up. I need to really learn transfers since that is one of the main things you do a lot of.
I think I am also amongst the hyperfixator group in this thread. I was previously into speedsolving Rubik’s cubes and roasting coffee so I feel a lot of these answers lol.
Some more niche than others but basically…making stuff. Cross stitch, yarn crafts, sewing, needle felting, dicemaking, 3d printing, very occasional cosplay, I’m about to try my first macrame kit and a friend is planning for us to learn punch needle together.
There’s something just so satisfying about making real stuff you can use, or wear, or wash yourself with or whatever (I also briefly got into soapmaking).
If you want to chat about basically any craft (or just lurk and look at pretty projects, that’s ok too), I’ve been keeping a megalist of relevant communities and magazines here https://lemm.ee/post/224890. And if anyone reading this runs a related one that should be on the list please DM me to be added!
Are you on matrix? It is not letting me DM for some reason.
Oh weird! Been chatting to plenty of people so it works in general but maybe our instances are having issues today. I am not on Matrix yet, should probably sort that out this weekend really. Just sent you a test DM see if it’s broken both ways
Dice making is cool! I’ve been wanting to get a 3d printer to print some components for my skates!
You’ll buy it to make one thing and suddenly you’re printing everything and your whole life is made of plastic. Totes worth it though lol.
This sounds so cool and I wish I had the time to try it all but I hardly have the time to knit as much as I used to :D
stealth camping. basically camping where your not supposed to / normally wouldn’t want to, and have your presence remain unknown. it’s great fun and breathed new life into “the outdoors” for me
deleted by creator
It’s shocking how easy it is. I’ve gotten in the habit of stripping out the caps from old electronics before I recycle them. Makes repairs a lot easier when you’ve got spare parts.
I’ve always wanted to do this mut know nothing about electriconis. Do you have any good resources to get into it?
deleted by creator
I’m pretty into conlanging, which is basically making up languages. There are tons of different approaches and ways people can go about it, but like probably most (or at least a plurality of) other conlangers, I generally go for something as naturalistic as possible. I’m also into linguistics so it serves as kind of an interesting way to explore different features and grasp them better, as well as just an excuse to do more research to find out more about something.
Oooh. Have you heard of that indigenous language that is the only one in the world that doesn’t have a grammar structure that requires words? So it can be spoken, or whistled with the same functionality. It’s stupid difficult to learn, but the thought of carrying entire conversations via whistling is incredibly intriguing to me.
I heard about it in an college anthropology class, and its been something I’ve marveled at occasionally ever since.
Whoo! I’ve been spending the last year getting into Esperanto, and been slowly getting obsessed with how language works
Have you listened to this? It’s available on Audible and I found it mind blowing.
The Story of Human Language by John McWhorter, The Great Courses
I like traditional slavic folk music and leatherworking (which is misleading what I do is more like crafting rather basic things out of leather, I don’t tan or work the leather myself)
Found the Witcher costume maker
Although the overlap seems to point in that direction (and also the fact that I do enjoy the Witcher books and games very much) it’s rather coincidental:
I actually prefer fully acapella, white-voice songs (but I do enjoy instrumental ones too) And regarding leather I’m more into making gear like chokers, cuffs and whatnot (though I’m not trying to make any money out of it as I don’t sell)
Ooh one of my fave small YouTubers is big into her leathercrafts, I’ve been living vicariously through her and !leathercraft@lemmy.ca (Lemmy / Kbin) for a while but not quite taken the plunge yet myself. It’s only a matter of time though 😅
Hi there! Looks like you linked to a Lemmy community using an URL instead of its name, which doesn’t work well for people on different instances. Try fixing it like this: !leathercraft@lemmy.ca
Roasting and brewing the best coffee I possibly can.
Installing open source operating systems or firmware on every device I can.
What’s your coffee setup(s) like? Pour over, espresso, drip?
I’m really into electronics and plants. Together. I grew up on a farm with greenhouses so my interest in control systems, electricity and plants developed all together. I’ve built growth chambers, plant lights, automated waterers and yet none of that was for weed.
I love mapping on openstreetmap.org
