Yes it would. In my case though I know all of the users that should have remote access snd I’m more concerned about unauthorized access than ease of use.

If I wanted to host a website for the general public to use though, I’d buy a VPS and host it there. Then use SSH with private key authentication for remote management. This way, again, if someone hacks that server they can’t get access to my home lan.

Their setup sounds similar to mine. But no, only a single service is exposed to the internet: wireguard.

The idea is that you can have any number of servers running on your lan, etc… but in order to access them remotely you first need to VPN into your home network. This way the only thing you need to worry about security wise is wireguard. If there’s a security hole / vulnerability in one of the services you’re running on your network or in nginx, etc… attackers would still need to get past wireguard first before they could access your network.

But here is exactly what I’ve done:

1. Bought a domain so that I don’t have to remember my IP address.
2. Setup DDNS so that the A record for my domain always points to my home ip.
3. Run a wireguard server on my lan.
4. Port forwarded the wireguard port to the wireguard server.
5. Created client configs for all remote devices that should have access to my lan.

Now I can just turn on my phone’s VPN whenever I need to access any one of the services that would normally only be accessible from home.

P.s. there’s additional steps I did to ensure that the masquerade of the VPN was disabled, that all VPN clients use my pihole, and that I can still get decent internet speeds while on the VPN. But that’s slightly beyond the original ask here.

A couple of options in my opinion, as I just did this myself:

You can use the CLI tool to “upload” them. You can even do this from the server itself. So upload times would be as fast as your network card can process or however fast your server is, whichever is slower. It does require that you create an API key for the user in question though.

Otherwise you can create an external library and link that to your account. Now Immich will still index this library but it won’t move or manage the actual files. I’m not sure though if it looks at those files for duplicates (i.e. if you try and upload the same photo from your phone to the server). This external library will also prevent deleting photos as well, FYI.

There might be other options that I’m not aware of, as I’ve only been using Immich for about a month now.

Edit: link to the CLI documentation: https://immich.app/docs/features/command-line-interface/

deleted by creator

Correct. As I can only provide links to posts that are on your selected home instance. Eventually I’ll change this but you’ll get a 404 page for links that aren’t on your home instance, but see my P.S. below.

P.s. there have been changes to the Lemmy API that have prevented me from getting updates for about a month now. So most of the results you’re seeing are from old posts only. Until I can rebuild the crawler or find a new API there won’t be any new content.

I’m guessing Samsung. Google seems to show a handful of posts online about Samsung users asking about it. Or at least asking what is it, and how to uninstall it.

Pixel doesn’t seems to have it pre-installed anyway.

I can’t say anything about other manufacturers though.

https://github.com/LemmyNet/lemmy/blob/d909f3455ddb89d45f35c78c4ce96bd0896469b1/crates/api_common/src/utils.rs#L302

If the honeypot is set the request is simply discarded.

FYI: https://en.m.wikipedia.org/wiki/Honeypot_(computing)

But there should also be a separate endpoint to get an auth token. (I don’t remember it off the top of my head). Then your bot should store that somewhere and send it as the auth parameter in every request.

Ya if it’s not federated already, I’m thinking the link will just remain as-is? Then comes the question of what happens after federation is complete? Ideally I’m thinking to do these rewrites as the comment containing the link gets federated so it only happens once, but that prevents updates… If I do it during someone looking at the post, then that becomes a lot of network traffic…

Still a lot to plan out initially and then propose to the devs for feedback… So it’ll be awhile still.

I just got a PR merged today that might help with this. I’ll start experimenting with it more over the next week or so.

Basic theory is that I can detect at least lemmy posts in the comment bodies and then rewrite those to your local instance. Primarily question is going to be performance, as remote network calls will be necessary.

Fair enough. Sometimes you can’t help but go down these rabbit holes though.

How do you account for the duplicate Riker in TNG? Who’s the real one and where did the extra matter come from then to assemble William vs Tom?

(It’s been a long time since I’ve seen that episode so I don’t remember if they covered that but on-screen)

A similar question could be raised for the Rascals episode…

Think of Lemmy as email. Each post or comment is just an email sent to a distribution group (a community). If your email server goes down, all of those users and distribution groups are gone. Now I’ll still have the emails I sent to you in my email box but you won’t be able to see them as your email server is offline. Sure you could create a new account on a new server but you’d have to tell everyone about your new address (federate) but there’s nothing to associate your old user with your new one and there’s no way to backfill data. I could reply-all or forward (comment) on to your new address but there’s still no way to associate those old posts with your new account.

Yes but what if you search and find a post that doesn’t exist on your home instance? You’d be taken to a 404 page and can’t do anything.

But I’ve got an issue on GitHub for this. And just raised a PR on Lemmy to support the changes I need for this. But a reminder, once you can search all instances you may encounter 404s opening the posts that you find.

You can always try constructing the URL manually. I know this sucks, but it might be a workaround.

https://lemmy.ml/c/songaweek@lemmy.world

Long story short you just have to go to lemmy.ml and then add /c/ followed by the community name @ the instance it belongs to.

https://www.search-lemmy.com

You can do advanced filters on posts or communities. Feel free to provide feedback as well. I’m still working on the order of the results, etc…

If an instance goes down (permanently), federation of all of the communities hosted by that instance essentially stop. The content that has already been posted remains but anything new added to those communities only remain on your home instance. The only way for federation to resume is for that instance to come back online with the same domain it started with.

Same. Honestly I need to create a community just for this tool IMO. But I don’t have the time to moderate it.

https://www.search-lemmy.com/ ?

I’m open to feedback though if the search results seem out of order etc…

With ActivityPub all of the primary ids contain the domain of the hosting server. So if you lose your domain none of the other instances know that you’re the authority on those communities, posts, comments or users. So essentially federation breaks with all of the old data.