![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.ml/pictrs/image/q98XK4sKtw.png)
The two aren’t even in the same league. I’m a big open source advocate don’t get me wrong, but VirtualBox is horrible to use and its not what OP asked.
The two aren’t even in the same league. I’m a big open source advocate don’t get me wrong, but VirtualBox is horrible to use and its not what OP asked.
Its very much still needed and heavily utilised in the enterprise world. Volume size is usually the lowest priority when it comes to arrays, redundancy and IOPS (the amount of concurrent transactions to the storage) is typically the priority. The exception here would be backup and archive storage, where IOPS is less important and volume size is more important.
As far as replacing sectors goes, I’ve never heard of this and I might just be ignorant on the subject but as far as I know you can’t “replace” a bad sector. Only mark it as bad and not use it, and whatever was there before is gone. This has existed since HDD days. This is also why we use RAID - parity across disks to protect data.
Generally production storage will be in RAID-10, and backup/archive storage in RAID-6 or in some cases RAID-60 but I’m personally not a fan.
You also would consider how many disks are in the volume because there is a sweet spot. Too many disks = higher likelihood of total array failure due to simultaneous disk failures and more data loss in the event it does, but too few disks and you won’t have good redundancy, capacity or performance either (depending on RAID level).
The biggest change I see in RAID these days is moving away from hardware RAID cards and into software-based solutions like Microsoft Storage Spaces, md, ZFS and similar. These all have their own way of doing things and some can even synchronise the data with other hosts.
Hope this helps!
Where my download accelerator plus gang at
Is there a faster way to switch profile than going into the settings? Sounds like you’ve got a much better way than what I’ve been doing
Sorry I meant TIL about it being considered stable, haha. I’ve known about Fedora because I used it when it was meant to replace the free Red Hat Linux.
As for Steam, I don’t recall how I installed it, sorry! I just recall significant grief getting it going (again, perhaps a skill issue) but had no big roadblocks using OpenSUSE.
TIL about Fedora, last I knew it was a rolling bleeding edge OS. Clearly lots of movement in the Red Hat camp.
As for gaming, drivers were not the problem for me. Getting games to run with ease was. On OpenSUSE, I just install Steam, enable Proton and basically go at that point. Red Hat was non-trivial to do this. Could be a skill issue, but I had a better time getting going with OpenSUSE TW.
Sort of, OpenSUSE Tumbleweed. I started on OpenSUSE Leap but had issues getting things like GPU and Steam working. Red Hat was also a non-starter because of the lack of gaming functionality.
TW works great for gaming and the enterprise features I care about (like domain joining) work out of the box. Its certainly harder to set up than something more geared towards home use (typically one of the various the downstreams of Debian or Arch) but that doesn’t bother me.
Second to this - for what its worth (and I may be tarred and feathered for saying this here), I prefer commercial software for my backups.
I’ve used many, including:
What was important to me was:
Believe it or not, I landed on Backup Exec. Veeam was the only other one to even get close. I’ve been using BE for years now and it has never skipped a beat.
This most likely isn’t the solution for you, but I’m mentioning it just so you can get a feel for the sort of considerations I made when deciding how my setup would work.
As others have mentioned its important to highlight the difference between a sync (basically a replica of the source) vs a true backup which is historical data.
As far as tools goes, if the device is running OMV you might want to start by looking at the options within OMV itself to achieve this. A quick google hinted at a backup plugin that some people seem to be using.
If you’re going to be replicating to a remote NAS over the Internet, try to use a site-to-site VPN for this and do not expose file sharing services to the internet (for example by port forwarding). Its not safe to do so these days.
The questions you need to ask first are:
Once you know that you will be able to determine:
I hope I haven’t overwhelmed, discouraged or confused you more and feel free to ask as many questions as you need. Protecting your data isn’t fun but it is important and its a good choice you’re making to look into it
Back in the day when the self-hosted $10 license existed I was using JIRA Service Desk to do this. As far as ticketing systems go it was very easy to work with and didn’t slow me down too much.
I know you don’t want a ticket system but I’m just curious what other people will suggest because I’m in the same boat as you.
Currently I haphazardly use Joplin to take very loose notes and sync them to Nextcloud.
If you want a very simple option with minimal setup and overhead you could use Joplin to create separate notes for each “part” of your lab and just add a new line with a date, time and summary of the change.
I do also use SnipeIT to track all my hardware and parts, which allows you to add notes and service history against the hardware asset.
Other than that, I’m keen to see what everyone else says
Servers are a different story but for Desktop, OpenSUSE.
Because:
Part of my transition from Windows to Linux was that basic tasks like installing software or even the OS itself shouldn’t be a high effort endeavour. I should be able to point to a package file or run a package manager and be able to go about my day without running “make” and working my way through dependency hell.
I say this as a Linux user of all different flavours for well over 15 years who has a deep love for what it brings to the table. If we want it to be common place with non-IT folks, it needs to work and it needs to be simple to use.
Jumping on the OpenSUSE bandwagon. I use it daily, have been running the same install of Tumbleweed for years without issue. I’m using KDE Plasma which it let’s you choose as part of the installation which fulfils that requirement for you as well.
If you’re familiar with Redhat you’ll feel at home on it. Zypper is the package manager instead of yum/dnf and works really well (particularly when coping with dependency issues.
I’ve worked with heaps of distros over the years (Ubuntu, Debian, Fedora, RHEL, old school Red Hat, CentOS, Rocky, Oracle, even a bit of Alpine and some BSD variants) and OpenSUSE is definitely my favourite for a workstation.
Not a distro but maybe Plasma Bigscreen is in the ballpark of what you’re after?
Depends on your use case, but you can use some Group Policy Objects on Linux (at least with sssd). See: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/windows_integration_guide/sssd-gpo
You can also grant sudo to AD group members in the sudoers file, which is how I’ve done it in a corporate setting.
I believe there are 3rd party ADMX templates you can add to your domain controllers to get more granular as well as additions to the AD schema, but I haven’t gone that deep with it since between sssd and the sudoers file I can achieve what I need to.
Authelia is popular, as is Keycloak. I believe Red Hat develops Keycloak or at least has a hand in it.
I’m on this journey as well, figuring out what I’m going to use. Currently most of my services just use LDAP back to AD but I’m looking to do something more modern like SAML, oAuth or OpenID Connect so that I can simplify the number of MFA tokens I have.
Just as an anecdote you may find useful - Personally I used to run an Active Directory for Windows and FreeIPA for my Linux machines and have managed to simplify this to just AD. Linux machines can be joined, you can still use sudo and all the other good stuff while only having one source of truth for identity.
Thanks for letting me know (and to the others that did as well). I might be able to jump sooner than anticipated, I’ll check my client tonight for the feature. I’m using it on the Apple TV, I think its the Swiftfin flavour of the client.
As a side note, it sure is a refreshing change to not be downvoted into oblivion for simply having out of date information and respectfully informed in the comments.
Whilst some might not find it a huge deal, not being able to shuffle all episodes of a specific TV show is a deal breaker for me. I do have Jellyfin deployed and configured, ready to go for when the feature arrives. Plex feels a lot more polished as well, but I can get over that.
Thank you! I realised my mistake briefly after and edited but its still a bit busted up. Hopefully its legible enough now :)
Edit: I love your username haha
I don’t know if this helps anyone but here are some crisis resources:
🇺🇸 United States 🇺🇸
Emergency: 911
National Eating Disorders Association: https://www.nationaleatingdisorders.org/help-support/contact-helpline
National Domestic Violence Hotline: 1- 800-799-7233
National Suicide Prevention Lifeline: 1-800-273-TALK (8255); www.suicidepreventionlifeline.org
Suicide Prevention, Awareness, and Support: www.suicide.org
Lifeline Crisis Chat: https://www.contact-usa.org/chat.html
Crisis Text Line: Text REASON to 741741 (free, confidential and 24/7)
Self-Harm Hotline: 1-800-DONT CUT (1-800-366-8288)
Family Violence Helpline: 1-800-996-6228
Planned Parenthood Hotline: 1-800-230-PLAN (7526)
American Association of Poison Control Centers: 1-800-222-1222
National Council on Alcoholism & Drug Dependency: 1-800-622-2255
GLBT Hotline: 1-888-843-4564
The Trevor Project: 1-866-488-7386 or text “START” to 678678. Standard text messaging rates apply. Available 24/7/365. (Provides crisis intervention and suicide prevention services to lesbian, gay, bisexual, transgender, queer & questioning—LGBTQ—young people under 25.)
Veterans Crisis Line: https://www.veteranscrisisline.net/
International Suicide Prevention Directory: http://suicideprevention.wikia.com/wiki/International_Suicide_Prevention_Directory
🇨🇦 Canada 🇨🇦
Emergency: 911
Hotline: 1-888-353-2273
YourLifeCounts.org: http://www.yourlifecounts.org/need-help/crisis-lines
🇬🇧 UK & Republic of Ireland 🇮🇪
Emergency: 112 or 999
Hotline: +44 (0) 8457 90 90 90 (UK – local rate)
Hotline: +44 (0) 8457 90 91 92 (UK minicom)
Hotline: 1850 60 90 90 (ROI – local rate)
Hotline: 1850 60 90 91 (ROI minicom)
YourLifeCounts.org: http://www.yourlifecounts.org/need-help/crisis-lines
🇦🇺 Australia 🇦🇺
Emergency: 000
Lifeline.org: https://www.lifeline.org.au/Get-Help/Online-Services/crisis-chat
LifeLine Australia: 1-300-13-11-14
YourLifeCounts.org: http://www.yourlifecounts.org/need-help/crisis-lines
🇳🇿 New Zealand 🇳🇿
Emergency: 111
Lifeline 24/7 Helpline: 0800 543 354
Suicide Crisis Helpline: 0508 828 865 (0508 TAUTOKO)
YourLifeCounts.org: http://www.yourlifecounts.org/need-help/crisis-lines
This is the method I use in your scenario, OP. You can use Folder2iso to get the files in that you need. If the OS has official VMware tools, you can also mount the VMware Tools ISO straight from workstation into the VM and this will give you the clipboard service so you can copy and paste files between the host and VM, if this scenario is permitted within your isolation needs.
Otherwise, go the ISO route. You just can’t bring stuff out of the VM back to the host is all.