• notaltaccountlol@lemmy.world
        6·
        2 months ago

        🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥

        🟥Thanks for the red circle, 🟥

        🟥I was really lost there for a moment. 🟥

        🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥🟥

  • kibiz0r@midwest.socialEnglish
    89·
    2 months ago

    Here is a basic way to configure the service:

    …

    But this method has significant drawbacks and probably won’t work for most use cases, so do what works for you.

      • kibiz0r@midwest.socialEnglish
        32·
        2 months ago

        And those configs are clearly the result of someone else stitching together three different examples from different versions, with some settings that are silently ignored in the latest version or only exist when compiled with special flags.

    • ChapulinColorado@lemmy.world
      25·
      2 months ago

      That’s your own darn fault. You were supposed to know the 0.0.1 version was GA instead of assuming 0.0.3-alpha was stable. You would have known if you read the 2000 line README. On the second dependency there is no README though, so just use the latest and hope it’s still compatible.

    • lennivelkant@discuss.tchncs.de
      8·
      2 months ago

      Then do some digging and find that the GitHub instructions omitted some particular dependency, make a mental note to contribute a PR to the documentation later once you’ve got it working, get it working, promptly forget contributing that documentation, move distro later, try to reinstall the same program, make the same mistake, same discovery, learn nothing, repeat ad nauseam.

    • ivanafterall ☑️@lemmy.worldEnglish
      5·
      2 months ago

      I’m trying to learn Houdini. I thought, “Oh, I’ll just download a template and see how it should look.”

      Even already-made templates are apparently out-of-my-depth.

  • boredsquirrel@slrpnk.net
    61·
    2 months ago

    OpenSUSE microOS guys be like

    • dont install any RPMs
    • we wont help you adding RPM repos
    • you need to install RPMs for drivers and stuff
      • boredsquirrel@slrpnk.net
        4·
        2 months ago

        No on Fedora Atomic Desktops for some reason people tell you not to install RPMs, but actually it is unproblematic.

        Unlike OpenSUS microOS, Fedora Atomic Desktops have a reset function to delete all local changes and become 100% upstream.

        The issues really only come with /var, /etc and the user home where config-file-creep grows and you get random errors after doing to much shit with your install.

        But it is still safer to install RPMs on than on dnf Fedora.

        OpenSUS microOS has no advantages over traditional Tumbleweed afaik, apart from the atomic updates that you have a single fallback option.

  • starman2112@sh.itjust.works
    511·
    2 months ago

    “Just gotta enable the OEIS menu in the .sysbin folder and it’ll make that program CHIM, that should solve your problem”

    What it looks like when I ask “how do I put Cura on the taskbar”

    • Macros@discuss.tchncs.de
      312·
      2 months ago

      I don’t know why such answers get so many upvotes.

      The real answer is: Right-click -> Pin to Taskbar. (In sane desktop environments like KDE. If you choose to install Fancy DE Alpha 0.0.2, you know what you got into!)

      Yeah we are in a meme community, still I like my memes based on reality, makes them way funnier.

      (Also having a standard place for documentation for everything is a blessing!)

      • accideath@lemmy.world
        211·
        2 months ago

        Sure but it’s not a rarity that forum answers expect you to be very familiar with linux file structures and terminal commands. If you’re a beginner who runs into an issue (as beginners do), you oftentimes need to find a tutorial and then tutorials that explain the tutorial. It gets even worse if you’re not on a debian/ubuntu based distro (although, to be fair, if you’re a newbie, that’s sorta asking for trouble).

        • Petter1@lemm.ee
          51·
          2 months ago

          Or you just use Arch and have one place for all the apps (AUR) and one place for all the manuals (ArchWiki)

          And when using endeavourOS you get an easy install on top it, and as a bonus a nice tool to install / uninstall nvidia proprietary drivers using a single command as well.

          Pure love 🥰

          Ah, and just typing yay, updates everything 👌🏻

          • accideath@lemmy.world
            3·
            2 months ago

            You‘re a step too far again though. The average newbie would insta-panic by the thought of using the terminal. Needing a command to install drivers or to update is already too hard.

            Arch based distros like Manjaro, endeavorOS or even SteamOS, for that matter are great (have used manjaro myself in the past until I settled for fedora/nobara) and the AUR can make acquiring software a lot easier. However, the moment something breaks, a newbie will be lost and the Arch Wiki won’t save someone who doesn’t know what to look for in the first place.

            If anything, my recommendation for absolute beginners (as long as their hardware isn’t state of the art or they want to game, primarily) would be Mint. It’s easy to set up, has a nifty (and graphical) driver installer, has a default DE that is close enough to windows as to not confuse someone who hasn’t used anything else in their life and also, it shares enough DNA with ubuntu that most tutorials out there work without having shit like snap in there.

            • Petter1@lemm.ee
              2·
              2 months ago

              😁thank you for your very reasonable and correct answer (well with some little parts I disagree just a bit) in a meme community 😇✌🏻

  • variants@possumpat.ioEnglish
    24·
    2 months ago

    As someone who works in manufacturing this makes prefect sense and wish more instructions were this clear

      • Petter1@lemm.ee
        10·
        2 months ago

        Tighten them but tighten them not too much but make sure not to tighten them too less, I guess

      • variants@possumpat.ioEnglish
        3·
        2 months ago

        Like put them in a few threads but don’t tighten then yet until you complete the next step

      • ayyy@sh.itjust.works
        3·
        2 months ago

        It means “put all of the screws in the holes in order to start guiding the surfaces that you’re screwing together into the correct position, but don’t firmly tighten down all the screw until you have put all of them in so that you can ensure proper alignment of everything before you lock it in.”

          • 0x4E4F@sh.itjust.worksOPEnglish
            3·
            2 months ago

            Yeah, it’s fairly obvious to me as well. That’s basic assembly procedure, you don’t tighten them fully until you have them all in place.

            This manual will just confuse me, I’ll just follow the assembly plan without actually reading it 😁.

  • MedicsOfAnarchy@lemmy.world
    16·
    2 months ago

    Clear your mind. Simply “be” the screws. Do not aim for completion, for one is never complete. Also, it’s upside-down.

      • untorquer@lemmy.world
        5·
        2 months ago

        The first one you learned or became fluent in. For example, it’s often English for USA people or Spanish for Spanish people, or Japanese for Japanese people

        Often also called mother tongue or primary language.

        Otherwise, it can be the one you are most comfortable with or default to.

        • Petter1@lemm.ee
          4·
          2 months ago

          Ahh, I see, I think it is a translation issue where the tect got too long ant cut. I suppose the missing words are “… too much”.

          That said in my first language: “zie d schruube ah, pass aber uf dass sie ned zu fest aziesch”

            • Petter1@lemm.ee
              4·
              2 months ago

              It is a flavour of german talked in Zurich, Switzerland. I personally have some influence from cantons east of Zurich. There are no rules about how to write, we just write phonetically. Official stuff is written in German German.

              • lennivelkant@discuss.tchncs.de
                2·
                2 months ago

                Way off the mark then, embarrassing. Particularly since I’m from Southwest Germany, you’d think I’d recognise Schwyzerdütsch. I definitely need more exposure to dialects.

          • untorquer@lemmy.world
            2·
            2 months ago

            Oh yeah I think it was a translation issue. Translators have trouble with conjugation and synonyms. But the result is the same.

            • Petter1@lemm.ee
              2·
              2 months ago

              That is not just a regional dialect. And in my opinion dialects are more first language than the learning “real language” afterwards. That is clearly the second language…

    • 0x4E4F@sh.itjust.worksOPEnglish
      6·
      2 months ago

      The sudo thing should really be explained like “if you want this implemented system wide, run it with sudo, if not, don’t use it”.

  • ian@feddit.ukEnglish
    8·
    2 months ago

    English is slightly ambiguous here. As tighten has 2 meanings. Turning a screw clockwise is to tighten it, as opposed to loosen it anticlockwise. But it’s quite loose. Finally, to make it tight and secure, you tighten it with one last turn.

    • 0x4E4F@sh.itjust.worksOPEnglish
      71·
      2 months ago

      Shouldn’t “screw in the screw” be used instead of “tighten the screw” when you’re just inserting it fully but not tightening it?