In the last few years I have purchased a pressure cooker and an air fryer. They both waste electricity by having an off light. Furthermore they act like red nightlights and my kitchen has an eerie red glow at night. What is the actual purpose for off lights besides to waste electricity?

  • Captain Janeway@lemmy.world
    link
    fedilink
    arrow-up
    41
    arrow-down
    1
    ·
    11 months ago

    Off lights let you know if it’s broken. If it’s on, it’s obviously working. If it’s off and the light is on, it’s getting power. If it’s off and plugged in, but not displaying the light - that indicates it’s broken or not getting power.

    • Dirk Darkly@sh.itjust.works
      link
      fedilink
      arrow-up
      14
      arrow-down
      4
      ·
      11 months ago

      You could also just try turning it on to see if it has power. I don’t see how the light is actually useful for this.

      • dustyData@lemmy.world
        link
        fedilink
        English
        arrow-up
        19
        ·
        edit-2
        11 months ago

        The power draw from a single LED is nearly negligible. If it’s a heating appliance, for example, it’s several magnitudes more wasteful to turn it on, just to see if it heats properly. Even with other electronics the LED quickly tests functionality with almost zero power without having to power up the entire system which would use a ton of energy, since it assumes it is about to be used for its purpose. It can also be an early warning of failure, I wouldn’t use a heating appliance whose off light failed, because if the electronic failed, turning it on could hurt the whole house circuit or further damage the appliance itself. The light is a quick “hey, I need service” warning. Just like cars, those warning lights have meaning and use, they aren’t just a decoration.

        • Admiral Patrick@dubvee.org
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          3
          ·
          11 months ago

          Still seems useless. I never turn my appliances on just to see if they work. I just…use it. If it doesn’t do anything, then I know it’s broken.

          It’s also not just a single LED. In your house, yes, but multiply that by however many appliances in the wild have that same “feature” and the power wastage is much more real. It’s the same reason it’s recommended to unplug phone chargers and such when they’re not being used.

          Vampire power, I believe, is the term. It’s when millions of tiny power loads add up to a significant overall draw while performing no useful work.

          • dustyData@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            1
            ·
            11 months ago

            however many appliances in the wild

            Vampire power is a thing, but not really that huge since regulations have launched the 1W initiative. The vampire power consumed by the average house in the US is less than a thousandth of the entire energy consumption. Less than a dollar per year. Of course, over a couple million homes we are talking about a few million dollars, that’s not nothing. But also, it’s less than a 0.001% of the entire grid residential electrical consumption. To cut power emissions and usage, that’s almost a non-issue at best, a distraction at worse.

    • grayatrox@lemmy.world
      link
      fedilink
      arrow-up
      5
      arrow-down
      2
      ·
      edit-2
      11 months ago

      That makes no sense to me. Why not have an on light instead? If the light is on, and the device is operating as expected, that’s good. If the light is off then it has no power or it’s broken. If the light is on and nothing is happening, it’s broken.

      If the light is going to be annoying when the device is on, then turn it off after a few seconds.

      • CmdrShepard@lemmy.one
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        11 months ago

        Seems reasonable on something dangerous like a toaster oven or pressure cooker that you obviously wouldn’t want to leave on and unattended. These lights use almost no power at all.

  • andrewta@lemmy.world
    link
    fedilink
    arrow-up
    18
    ·
    11 months ago

    The ultra tiny amount of electricity is… Well you probably would never notice it on your bill.

    But yeah it can be annoying having it there. I guess the purpose is to tell you that it has power available if you need it

    • CmdrShepard@lemmy.one
      link
      fedilink
      English
      arrow-up
      4
      ·
      11 months ago

      Yes those small LED indicator lights use around 10-20mA of current at like 3V which is only 0.06W of power.

  • cerement@slrpnk.net
    link
    fedilink
    arrow-up
    13
    ·
    11 months ago

    get a Samsung appliance – they like to use ultra-bright BLINKING blue LEDs for sleep mode

    • davidgro@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      11 months ago

      I have a monitor that does that (but in white). It’s in my bedroom. I had to use electrical tape like another commenter here mentioned - I left a tiny hole in the tape so I can see a faint light up close, but it’s not making the room blink at night now.

    • Zozano@aussie.zone
      link
      fedilink
      arrow-up
      4
      ·
      11 months ago

      I’m never buying another Samsung monitor.

      I can literally hear it blinking on and off at night, so I need to manually turn it off.

      Damn my perfect hearing.

  • edric@lemm.ee
    link
    fedilink
    arrow-up
    13
    ·
    11 months ago

    For soundbars at least, the off light is there because there shouldn’t be any lights on while it’s being used so as not to distract the person watching tv. So the only way to know if the device is off is to have a light on.

    • Hupf@feddit.de
      link
      fedilink
      arrow-up
      11
      ·
      11 months ago

      Maybe just have it exclaim “I’m off!” every five minutes, no need for an extra LED then.

      • octoperson@sh.itjust.works
        link
        fedilink
        arrow-up
        2
        ·
        11 months ago

        You joke, but one time I got woken up by what sounded like a Chinese lady complaining about batteries, and it turned out to be the low power alert on the cheapo import soundbar.

    • Meho_Nohome@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      11 months ago

      My soundbar has a tiny blue light in the bottom corner that’s on when the power is on and off when it’s off. I’ve never been distracted by the tiny little blue LED while watching TV.

  • lovely_reader@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    11 months ago

    I figured the purpose was to warn us that these devices have been left plugged in while not in use, which is not advisable because they can become a fire hazard.

  • dQw4w9WgXcQ@lemm.ee
    link
    fedilink
    arrow-up
    4
    arrow-down
    1
    ·
    11 months ago

    I visited my parents last weekend. They have s printer which has a wave light signal in standby - gradually switching from off to strong light and back. What my parents probably never noticed was the high pitch loud screech which followed the light. I guess the pitch was too high for my parents to hear, but not for me. So whoever designed that can go fuck themselves.