This is not a conversation about guns. This is a conversation about items that have withstood abuse that are near unbreakable.
Some items I have heard referenced as AK47 of:
Gerber MP600: It’s a multi tool
Old Thinkpad Laptops
Mag lights
Toyota Hilux
The P4$.FL 44 BF.A OBVIOUSLY guys why has no one mentioned it? Jesus Christ it’s like you want them to break!
^The comments in this thread
Carolina Outdoor Work Boots.
Like wearing a bulletproof vest on your feet.
Thank you for the recommendation :)
I’ve been searching for steel toes ever since I was burned by Red Wings.
Aeropress coffee maker.
Its like 20$, works really well, very simple design with few things to break.
What’s a French press? I’ve only seen drip pots in my life so I’m completely ignorant to the coffee world.
It’s like a small pitcher with a movable filter, you put in the ground coffee, hit water, stir, wait, push down the filter with the grounds, pour off the coffee with most of the ground staying in the French press.
So why not use a dripper? I’ve always wanted to get into coffee and want to try an espresso so bad lol
So why not use a dripper?
Whereas a drip just passes through the coffee, a French Press is more of a steep. You get a stronger taste from it than you would on a drip.
Espresso is a whole other thing, expensive to get into at home. It uses a much finer grind and (IIRC) the water is pushed through under pressure.
Wild. That’s kinda intricate coffee for most people is just a simple process and keep moving. Thanks for the knowledge! I appreciate the write up.
French press is basically the same work as a drip machine, but a different shape. You just heat the water seperately and then pour it and the coffee into the French press, let it sit, press the plunger down, and pour. Actually takes slightly less time than any cheap dropper I’ve used and runs 0 risk of burning the coffee (drip machines like to put heating elements into their bases to keep the pot hot, this can burn the coffee and ruin the flavor, French presses cannot burn coffee because they cannot add heat)
Espresso is finely ground coffee that uses steam pressure to brew (thus why espresso machines are fucking expensive, my mr coffee unit was 80 buck), it’s an involved process (worth learning gif you’ve got 20m to make a cup of coffee every time) but very good if you use beans you like AND you like your coffee flavor strong
Thanks for the detailed right up. I’m actually thinking of trying a French press now that several of you have taught me the mechanics. Seems a lot better than an old dripper but not so slow like an espresso. I Just thought those were cool because the tiny cup 😂
I switched to a French Press recently-ish. Instead of 4 or 5 cups of weaker coffee from my single serve drip thingie, I have 2 strong cups from my French Press and am ready to go. I’m thinking about trying a pourover to see how that is. Espresso is tasty and strong, but I don’t think I’d want it NEARLY enough to justify a machine. I usually only do espresso when I’m traveling, makes me feel fancy having a latte in the big city haha.
All that said, coffee is very individual. There is no “right” answer. If you’re happy with drip, than drip is the way. :)
If you want pseudo espresso grab a moka pot. You can snag them for like $20-50 and they make a good strong espresso style brew on your stove.
Bodum French Press
Dynavap DHV
Buffalo Bicycles
Vitamix Blender
I can’t find “DHV”, I guess that’s an old model? What would you recommend for something modern that “just works”?
DHV = dry herb vape.
All the dynavaps share the same rip so pick any one you like. I just use the basic stainless one.
If I were to get a new one today I would likely get the TinyMight v2. However I cannot speak for its reliability as I don’t have one.
Cast iron skillets.
If you season and clean them the right way they will outlive you.
I’m using the same one that my parents owned for 30 years and hope I will get another 30 years of usage out of it.
I think there’s only 2 ways to actually kill a cast iron pan. Dropping from a height that causes the brittle metal to break, or putting lead in it. Obviously no one puts lead in their cooking vessels, but small pots are/were used to melt lead to pour in bullet molds, so if you find an old used pot, it’s good to check for lead.
Also, ceramic linings can get chipped.
You can mistreat bare cast iron horribly, never seasoning it, washing it in the dishwasher, or whatever, and it won’t get irredeemably damaged.
We have one my great-grandma got before WWI that we use several times a week.
Unless you put them in the dishwasher
Thats the beauty of cast iron though. Even putting it through the dishwasher doesnt ruin the pan permanently. You just have to re-season it.
If someone puts my cast iron in the dishwasher the cast iron will still outlive them
As long as you don’t use a heated dry it’s pretty much fine tbh. If any rusts you just wipe it down or sand it and re season
Same goes for carbon steel. Unless you’re frying sticks of dynamite they are practically indestructible.
Pre-2010 Toyota Corolla
Camry too.
Pre GM SAABs. I’ve personally gotten 2 of my 5 to over 1,000,000 miles on the original engine and transmission. Both manual transmission. A couple hundred of them have made it to 2,000,000 world wide. The lowest milage I killed a SAAB at was 789,000 miles. I hydroplaned into a semi on I-75, and the car still technically ran, but I gave it to my parents as a parts car. Just read the owners manual, and be absolutely religious about basic maintenance.
Oh, and the turbos don’t like low octane fuel. It gums them up.
How does a turbo that intakes air get gummed up from low octane fuel? Maybe oil is the issue since turbos have oil seals. Maybe I’m missing some unknown factor on turbos.
It’s not the actual turbo that gets gummed, the fuel system is what gums up, but for some reason it’s far worse on the turbo versions of the cars. I could put low octane into the non turbo SAABs I had, and it didn’t gum up the intake the way the turbo versions did. I don’t know why.
Fuel lines degrade under lower octane perhaps. Sounds like a design flaw. I’ve always heard from my car auction and dealer friends that SAABs are junk through and through. I’ve heard it countless times. Hmm…
Nah, Americans just don’t like to read the manuals, and they got a bad reputation in the late '70s and early '80s when they first put turbos into the cars, because you had to pull into the driveway, and let the turbo spin down for at least 30 seconds to a minute. If you didn’t, the turbo would seize and then shred itself when you turn the car back on.
Also American mechanics don’t like the fact that the engine is not in the configuration they are used to. It’s rotated 90° on the z axis and 45 on the x axis. Absolutely solid tanks if you actually read the manual, and followed the routine maintenance recommendations.
Sounds like a giant pain to work on but I’m interested in doing some reading just to learn about something that can potentially contradict what I’ve always heard. Thanks. I’ll look into this.
Once you wrap your head around the new orientation of things, it’s actually really well designed to work on. I figured the mechanics just didn’t want to learn anything “new”
I’m just interested in super high mileage capable vehicles. For instance my cousin has a 12v Cummins diesel and it has over 1m miles. 750k ish when he got it 10 years ago.
Game Boys are usually regarded as durable as hell. There’s even one that withstood bombing during the Gulf War (1991)
Me and my cousin went tubing one time and he forgot his gameboy color in his pocket the whole time we were out on the water. There was water behind the screen but it still booted and played with some fresh batteries
Quartz watches: Casio F-91w
Mechanical watches: Seiko 5+1 for the Seiko 5s. Love me a SNZG07J1
I have an old clock in my cottage. I got it years ago from a previous cottage I renovated. When I found it, the glass had broken so I just treated it as a piece of junk. I renovated that first cottage over a winter and left the clock there to freeze. I put in an AA battery and forgot about it. It kept time great and didn’t lose time … for about two years on the same battery!
The dammed thing outlasted every other wall clock I owned. So I kept it, removed the broken glass and just left it like that.
After about 15 years I still have it in my cottage and it freezes and thaws with the northern Canadian weather. And I’ve only ever changed the battery with the same basic energizer alkaline battery maybe four times!
I’ve never found a comparable clock anywhere. Every new clock I’ve ever bought either fail prematurely or I am constantly changing batteries every two or three months.
So far I’ve junked about a dozen new clocks because they stopped working while this old cottage clock just keeps ticking reliably.
I’m never getting rid of my cottage clock.
Any seiko really
I’ve been using the Casio W800 series (W800-H currently) for the past 12+ years. This is my 3rd watch, only because I simply lost the first two. However, it’s about the 6th strap, so it’s like the AK’s strap.
(Off-Topic) Does anybody have “anti-planned obsolescence” communities?
Maybe where good products are discussed or recommended? Similar to r/buyitforlofe but without the shilling of socks
Edit:
Thanks, subscribed!
Classic Vitamix blender models. They just work. Long warranty. And even post warranty easily serviceable.
And for a buy-it-for-multiple-lifetimes citrus juicer to get juice for the blender, there’s the Nemco 55850.
They keep coming out with fancier models, but the 5200 still reigns supreme. Who needs programs on a blender?
Vitamix smell! Dontbreathis!
That’s Blend-Tec not Vitamix lol
Funny enough this is the first video I ever watched on YouTube, back in 2007, after switching from Google Video: https://m.youtube.com/watch?v=qg1ckCkm8YI
Japanese-made sewing machines from the 1950s. Most are all-metal and overbuilt, and will work like new with a few drops of oil, maybe a fresh belt. In the US they were imported and had local brand’s names put on them; what you’re really looking for is the “Made in Japan” on the back or bottom. Granny sewing machines also qualify, but most of the Japanese ones have zigzag
Pinecil soldering iron. Cheap (only $26!), open source, portable, usbc powered. Even more powerful than $100 ones. I love that thing
Thanks for the suggestion, I was looking at buying another soldering iron. I’m using a really obscure brand one that I got from my dad and that I have been using since I was around 8 (30 years ago).
I can only get replacement tips in South Africa so was looking for something with more support.
Open source soldering iron? How does that work?
The tip heats up enough to melt solder.
it has software for the temp control and such
specifically: https://github.com/Ralim/IronOS
It has some fancy features to allow for custom heating presets among other things. Also, it means you can easily repair/modify the hardware for whatever reason you might come up with.
Also, it means you can easily repair/modify the hardware for whatever reason you might come up with.
The ironic part is that you’d need a second soldering iron to do that.
It has a display and even bluetooth. The Firmware is open source. The schematics are available.
Imo open source is not that important for an iron unless you want to add a klingon translation. But the iron is pretty good, although it is often rather >50 bucks including shipping.
Open source might be important if we want to run DOOM on it.
Open source is good because it means it can be maintained even if the manufacturer shuts down. One of the biggest issues with keeping older tech alive and in a useful state is proprietary firmware.
My Yamaha f310 guitar. It’s supposed to be a beginner model, but I never felt the need for anything else. Took it with me traveling and after some 15000km on the road still sounds as on its first day.
Yes! I bought mine in 2004, it was the only proper steel string guitar that I could afford at the time. And it is a really good guitar. There has been zero need for any adjustments, the only replaced part (excluding strings, of course) is a single tuning peg. I was drunk and slipped while I was playing, the guitar hit the floor first but miraculously there was no other damage.
A friend of mine was a guitar tech/roadie for Dio and Metallica in his youth and when he tried the F310 his opinion was that “This isn’t a bad guitar at all, actually it sounds a lot like my own Martin back home. You really might want to hold on to this one.”
Yamaha makes the best guitar for the money.
The instrument I probably play the most is a nylon string Yamaha with a great dual pickup/mic that I got for $100 at a pawn shop. It has some cosmetic wear, but that’s a bonus in my opinion.
Salt.
- Nearly every recipe uses it
- infinite shelf life (durable)
- cheap as heck.
It’s funny how it used to be expensive. In Danish we have a saying to say someone is poor if “they can’t even afford salt for their egg”, as if an egg is cheaper than salt. Because it actually used to be that way.
- Keeps demons away
Good take on the question
